GE Refrigerator CI error code
CI means the refrigerator wants you to check the icemaker for proper operation. The control detected something off with the icemaker — it may not be making ice, may be jammed, or may have lost its water supply. The rest of the refrigerator keeps running normally.
Last updated: September 30, 2026
What causes the CI error?
- Icemaker turned off or its arm stuck in the off position
- Water supply to the icemaker blocked or disconnected
- Ice cubes jammed in the icemaker mechanism
How to fix GE CI — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Make sure the icemaker is on and clear
Confirm the icemaker switch is on (or the feeler arm is down), and remove any jammed cubes or obstructions from the icemaker area. - Check the water supply
Make sure the water line to the refrigerator is connected and the supply valve is open.Safety warning: Turn off the water supply valve before disconnecting any water line. - Reset the control panel
Unplug the refrigerator for a minute or two and plug it back in to clear the code.
When to call a technician
- CI returns even though the icemaker is on, clear, and has water
- The icemaker makes no ice after 24 hours of normal operation
Frequently asked questions
What does CI mean on a GE refrigerator?
CI means you should check the icemaker for proper operation — make sure it is turned on, not jammed, and has water. Call service if it still will not make ice.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.