Bosch Washing Machine E20/F20 error code
The washer detected heating happening when it should not, or the heating system behaved unexpectedly. The machine stops as a safety precaution.
Also shown as: E20, F20
Last updated: September 30, 2026
What causes the E20/F20 error?
- Heating circuit or temperature-control fault
- Fault in the electronic control of the heater
How to fix Bosch E20/F20 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Reset the machine
Turn the machine off and back on; Bosch's official guidance is that a simple on/off reset may clear a one-time E20/F20 fault. - Call customer service
If the code returns, contact Bosch customer service to book a service appointment, since this is not a user-fixable fault.
When to call a technician
- The code appears again after the reset
- The water feels hot when the cycle should be cold
- You smell burning or see smoke - switch off and call service immediately
Frequently asked questions
What causes unexpected heating in a washing machine?
Usually a fault in the heating circuit or the electronics controlling it; Bosch treats it as a service-level issue rather than a DIY fix.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Bosch codes →