Frigidaire Washing Machine E2 error code

The top-load washer is taking too long to drain — water isn't leaving the tub properly. The control stops the cycle rather than continue with standing water.

Last updated: September 30, 2026

Quick answer: Frigidaire washing machine error code E2: drain taking too long — water not leaving the tub. The most common cause is kinked or clogged drain hose. Try this first — check power and the lid. If that does not clear it, inspect the drain hose.

What causes the E2 error?

  • Kinked or clogged drain hose
  • Standpipe height wrong (too tall or too short)
  • Blown fuse or tripped breaker affecting the pump
  • Failed drain pump

How to fix Frigidaire E2 — step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Check power and the lid
    Check the fuse or circuit breaker, close the lid, and press Start/Pause — the washer won't spin with the lid open.
  2. Inspect the drain hose
    Straighten any kinks and clear clogs in the drain hose. Verify the standpipe height matches the installation instructions.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • Hose is clear but water still won't drain
  • Pump makes no sound at all
  • Unit was recently installed or moved — contact the installer if within 30 days

Frequently asked questions

Why does my washer stop with water still inside?

A drain fault like E2 is the usual cause — check the hose for kinks or clogs first.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

Samsung 4E Samsung 5E Samsung UE Samsung LE Samsung dE Samsung 3E Samsung Sud LG OE

All Washing Machine error codes across brands · All Frigidaire codes →